Tarot 5.8G 25 200 600MW 7086 48CH Image Transmitter Adjustable 5.8G Audio/Video Transmitter OSD for Multicopter RC TL300N6
EWRF e708TM3 , a power adjustable 5.8G Audio/Video transmitter, is the enhanced version
of 7086TM3. It only adds OSD setting of AV TX compared to 7086TM3.It works well with
several other commonly used Betaflight/Cleanflight FCs when using OSD setting. Almost all F3
and F4 targets ( except for those with integrated VTX) are supported.
Display : 1 digital tube / 2pc buttons
Work volatge : DC6-24V
Work Current : 130mA(25mW) /230mA(200mW) /280mA(600mW) /12V
Work frequency : 5.8G
Channel : 48CH
Work Power: 25mW/200mW / 600mW/Close ( can be adjusted )
Antenna Connector : PR-SMA
Transmission distance : 25mW/ 200m 200mW /1.5KM 600mW/5KM (Depends on enviroment )
Connector : 7 Pins (Power input , Power Place , PWM Input , Audio Input , 5V input ,Power Place , Vedio Input )
1.Press and hold the button P to choose the power of 25mW/200mW/600mW.
2.Use two short press to turn on/off the transmitting(PITMODE setting) and
then the TX LED will be twinkles or not respectively. When power is set to
OFF(PITMODE is effective), you can set bands and channels without
interference to others.The AV transmitting distance is only within 1-2 meters
when it is in Pitmode.
3. Only the TX LED is on when the power is set to 25mW,both two lights of TX
and 200mW LED are on when set to 200mW, All three lights TX,200mW and
600mW are on when set to 600mW.
Band and channel setting
1. Presss and hold the button C to choose the band A-b-c-d-E-F(circle).
2. Press the button repeatedly to choose the channel 1-8(circle).
3. When PWM port is connected with a RC receiver, it can been used to change
AV channels 1-8 and to shut transmitting by a RC( PITMODE in effect). Make
sure that there is a PWM signal from receiver within 3 seconds after
powering up ,otherwise the transmitter is back to button-press setting
mode . When in the setting mode of PWM, the dot on the digital display will
Product Introduce :
according to demand to adjust transmission power, 25mW / 200mw / 600mW
Support OSD , 5.8G adjustable power Image transmission
Support Betaflight flight control OSD configuration parameters
5V BEC output, can give the receiver, camera power supply
Zero interference on power and switching channels will never interfere with other users
With automatic overheating protection, to prevent the module damage
With the protection function, forgot the antenna will not damage the module
Supports OSD configuration channel, power and switch PITMODE mode
Supports PWM switching channels and switches PITMODE mode
Can lead to the key and parameters in the body outside
Mini digital display
Package include :
1 X 5.8G transmitter